Hope Pad Clip • Fits Tech and Tech Evo M4, X2, and V2 Brakes
Replacement reservoir cap screw for Hope brakes.
Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder
Replacement copper washers for 5mm or stainless Hope hydraulic brake line.
Brass compression olive for Hope hydraulic disc brakes.
Race Face aluminum chainring bolts for outer and mid chainrings.
Greenfield's RetroKit is used to mount Greenfield kickstands (sold separately) on bicycles that require this special piece due to cables being in the way or an unusual frame design. If you have any questions about using the RetroKit, please contact us.
Jagwire's Shift Inner Wire is a fine shift cable made of galvanized steel for optimum shifting performance and durability.
Jagwire's V-Brake Boot covers and seals the points where the the cable on your V-Brakes, linear-pull and direct-pull brakes enter the noodle. It's made of flexible rubber to seal the cable and help keep dirt, grit and moisture from entering. It keeps your cables and brakes working nice and smooth…
Brass hose insert for Hope hydraulic disc brakes.
Hope 5mm Standard Hose Kit with Fittings for Hope Brake
The Problem Solvers Cantilever Studs screw into the bosses built into bicycle frames to provide the proper mounting studs for brakes. Each brake requires two studs.
Race Face 12mm crank bolt/puller for Respond, Chester, and Ride DH cranksets.
Race Face 15mm crank bolt/puller for 2008 and newer Evolve and Ride cranksets.
Greenfield's Rubber Foot attaches to the bottom of the kickstand for added support on soft and slippery surfaces. It also prevents the kickstand from scratching your flooring. The Rubber Foot fits all Greenfield kickstands and many others, too.
Jagwire's Shift Inner Wire is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.
Race Face steel chainring bolts. Includes four sets of 12mm bolts/nuts for inner and outer chainrings.
Replacement spindle spacers for Race Face X-Type XC/AM cranksets.
The Problem Solvers Brake Boss Plugs are perfect for when you've removed your cantilever or linear-pull brakes in order to run disc brakes or a fixie setup. These plugs thread into the empty frame bosses and lend a clean look, while also protecting the threads inside the frame from corrosion.
Problem Solvers' 8mm Hex Crank Arm Fixing Bolt & Cap replace the old bolts for your crank. Uses an 8mm hex wrench.
Tough, nylon faced headset seal with easy-fit Velcro attachment to protect your headset from dirt, water, and grime.
Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.
Jagwire's Mountain Brake Inner Wire is a high-quality brake cable made of either galvanized or stainless steel for excellent braking performance, corrosion resistance and durability.
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.
Jagwire's Universal Cable Tips are crimp-on aluminum caps for finishing the ends of 1.8mm and smaller diameter cables. They prevent the cables from fraying and come in colors to add style to your ride. Choose from two color mixes in bottles of 30.
Jagwire's Universal Pro Non-Crimps are a custom finishing touch for the ends of your brake and shift cables and prevent them from fraying so the cables keep functioning. Also, because they're not crimped in place and go on/off without tools, you can easily remove them for holding the ends of the…
Add a custom finishing touch to your road bicycle by upgrading to Profile's Karbon Bar Plugs. These quality plastic plugs boast a trick simulated carbon finish and are simply pressed into the ends of the bars.
Replacement spindle spacers for Race Face X-Type FR/DH cranksets.
Attach your IS Mount disc brake brackets with premium SRAM mounting bolts. These bolts are made from stainless steel for a lifetime of use and come with thread-locking compound already applied.
The Problem Solvers Steerer Tube Shims are for installing 1-1/8-inch diameter threadless stems on 1-inch diameter threadless forks. The shim is made of light, durable anodized aluminum and is chamfered on the ends for easy stem installation.